Filament PLA Glitter 1.75mm Volcano Grey
Using Spectrum PETG your 3D model will obtain:
- scratch resistant
- durability and stability of the printout
- high temperature resistance
Description
Spectrum Glitter PLA is a PLA-based filament for additive manufacturing with colour concentrates which imparts the satin texture effect to printed items. It is another material with unique aesthetic properties. The surface satin texture of printed items largely reduces the visibility of layers on the side surface of printed items. Using a specially development pigment, it is possible to retain the classic properties of PLA, i.e. the simple and efficient printing, while obtaining a very low shrinkage rate and relatively high tensile strength. Thus the material is designed for those who appreciate simple printing and very high aesthetic properties.
With the above-mentioned properties, the applications of Spectrum PLA Satin are mostly oriented towards decorative art and interior design, where the aesthetic qualities prevail, while the 3D print-specific artefacts have maximally reduced visibility.
PLA advantages:
- made from biodegradable materials
- reduced visibility of layers on the side surfaces of printed items
- satin shine on the entire surface of printed items
- printing possible without hot pad
- easy separation of the object from the table
- high strenghtness
- easily in processing
- no shrinkage after cooling
Packaging
Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Color |
Volcano Grey |
Diameter |
1.75 mm |
Dimensional tolerance |
+/- 0.05 mm |
Printing temperature |
200-240°C |
Heated bed |
needed |
Net weight |
500 of 1000 gram |
Total Weight |
800 Gram |
Spool dimensions |
Coil 500 gram external diameter: 20 cm internal diameter: 5,2 cm width: 5,2 cm
Coil 1000 gram external diameter: 20 cm internal diameter: 5,2 cm width: 6,7 cm
|
Physical & termal properties of raw material
|
Specific Gravity: |
1.24 g/cc
|
MFR (210°C / 2.16kg), g/10 min: |
6 (D1238)
|
Heat Distortion Temperature: |
55°C
|
Tensile Strength at Break: |
53 MPa (ASTM D882)
|
Tensile Yield Strength: |
60 MPa (ASTM D882)
|
Tensile Modulus: |
3.5 MPa (ASTM D882)
|
Impact resistance: |
16 J/m (ASTM D256)
|
