with the new spool convertible into a coat hanger. Spool holder included.
Weight: 1 kg(net)
|Material||Polylactic Acid (PLA)|
|Filament net weight||± 1 Kg|
|Diameter||1.75 mm / 2.85 mm|
|Diameter Tolerance||± 0.05 mm|
|Recommended printing temperature||190°C - 210°C|
|Recommended printing speed||40/80mm/s|
|Fusion Temperature||210°C (± 8°C)|
|Vitrous transiction temperature||50°C|
|Ovalization tolerance||(max) ± 5%|
|Density||(21.5°C) 1,24 g/c2|
|Impact strength||5 KJ/m2|
|Elasticity||3310 Mpa (MD) - 3861 Mpa (TD)|
All EUMAKERS filaments are produced in our factories situated in Italy, respecting the highest standards of production.
They are manufactured with food-safe materials.
The spool can be converted into a coat hanger!
The idea arises from the will and need to reduce waste. When the filament is over, the spool could be transformed into a coat hanger.
The spool holder for your desk
Sometimes it could be hard mounting the spool in the 3D printer, so we have just eliminated the root cause including a practical spool support for your desk.
All filaments and spools are vacuum sealed to prevent damage from the environmental exposure. In the box you will find a zipper bag to storage them when in use.
|Print temperatuur:||190 °C - 210 °C|
|Diameter tolerantie:||± 0.05 mm|